Attention for the Use of High-Precision RV Gearboxes

Attention for the Use of High-Precision RV Gearboxes:

High-precision gearboxes are characterized by their high accuracy, high rigidity, low noise, and long lifespan. However, incorrect operation can not only prevent them from performing optimally but also lead to damage and other failures. Please pay special attention to the following points when using them:

1. Do not change the product assembly

The gear shafts should be separated before installation, and the product should be used in conjunction with the gearbox host to ensure its performance. It is strictly prohibited to modify the product assembly.

2. Do not use in applications where dropping is possible

Even if there are no visible marks on the surface after a drop, severe impact can still cause damage, misalignment of the connection parts, bearing indentation, and other internal failures.

3. Strictly prevent dust and chips

During assembly, it is important to prevent dust, chips, and other contaminants from entering the gearbox. Once they enter, they can cause premature bearing failure, abnormal tooth wear, abnormal noise, vibrations, and other issues during operation.

4. Assembly precautions

High precision gearboxes are typically lubricated with grease. The gearbox is pre-filled with grease at the factory, so there is no need to inject or apply grease during assembly.

Fubao Mechatronics Technology has provided detailed instructions on the proper use of all models of high precision gearboxes. As long as users follow the correct procedures, they can fully utilize their performance. If any unresolved issues arise, please consult our professional technical staff for assistance.